Radical-initiated homo- and copolymerization of cyanomethyl methacrylate

The kinetics of cyanomethyl methacrylate (CyMA) homopolymerization was investigated in acetonitrile with azobisisobutyronitrile as initiator. The rate of polymerization R_p was expressed by R_p = k[AIBN]^0.49[CyMA]^1.2 and the overall activation energy was calculated as 72.3 kJ/mol. Kinetic constants for CyMA polymerization were obtained as follows: k_p/k = 0.10 L^1/2s^?1/2; 2fk_d = 1.57 × 10^?5s^?. The relative reactivity ratios of CyMA(M₂) copolymerization with styrene (r₁ = 0.15, r₂ = 0.29) and methyl methacrylate (r₁ = 0.43, r₂ = 0.75) in acetonitrile were obtained. Applying the Q-e scheme (in styrene copolymerization) led to Q = 1.64 and e = 0.98. The glass transition temperature T_g of poly(CyMA) was observed to be 91°C by thermomechanical analysis. Thermogravimetry of poly(CyMA) showed a 10% weight loss at 265°C in air.     

Subsecond luminescence intensity fluctuations of single CdSe quantum dots

Photoluminescence (PL) intermittency characteristics are examined for single quantum dots (QDs) in a CdSe QD sample synthesized at a slow rate at 75 degrees C. Although the PL quantum efficiency was relatively low ( approximately 0.25), we noticed that the PL intensity of single CdSe QDs fluctuated on a subsecond time scale with short-lived "on" and "off" states. The subsecond PL intensity fluctuations of CdSe QDs are different from "on" and "off" PL blinking generally observed for QDs fluctuating on a millisecond to minute time scale. We characterized single QDs by identifying polarized excitations, topographic imaging using atomic force microscopy (AFM), and transmission electron microscopy (TEM). From analysis of the PL intensity trajectories from >100 single CdSe QDs, the average intermittency time was 213 ms. From the PL quantum efficiency, slow growth of QDs, intensity trajectory analyses, and previous reports relating surface trap states and PL properties of QDs, we attribute the subsecond PL intensity fluctuations of single CdSe QDs and short-lived "on" and "off" states to a high-density distribution of homogeneous surface trap states.     

A new Zn(II) coordination polymer with 4-pyridylthioacetate: assemblies of homo-chiral helices with sulfide sites

A coordination polymer [Zn(pyta)(OH)] (pyta = 4-pyridylthioacetate), was synthesized and structurally characterized; it is constructed by an alternating assembly of two types of homo-chiral helices, [Zn-OH] and [Zn-pyta], in which the sulfide moieties are fastened in the latter columns.     

A new approach to the synthesis of pyridazino[4,5-c]pyridazinones

The reaction of 5-hydrazinopyridazin-3(2H)-ones 1 with α-keto diester 2 in acetic acid afforded the corresponding 4,6-dihydropyridazino[4,5-c]pyridazin-5(1H)-ones 3 and pyrrolo[2,3-d)pyridazin-4(5H)-ones 4 . Compounds 3 were also obtained from 4-bromo-5-hydrazinopyridazin-3(2H)-ones 8 and 2 under milder conditions. 5-Bromo-4-hydrazinopyridazin-3(2H)-one 9 , the regioisomer of 8b , also reacted readily with 2a to give 4,7-dihydropyridazino[4,5-c]pyridazin-8(1H)-one 10b , the regioisomer of 3b .     

Synthesis of benzylidene-pendant polyphthalimidines from flexible bisphthalides and various diamines

New polyphthalimidine-forming monomers, 5,5′-(oxydi-p-phenylenedicarbonyl)bis(3-benzylidenephthalide) and the 6,6′-derivative, were synthesized by the Friedel–Crafts reaction of diphenyl ether with 5- and 6-chloroformyl-3-benzylidenephthalide, respectively. The direct polycondensation of these bisphthalides with both aliphatic and aromatic diamines in o-phenylphenol at 200–250°C afforded polyphthalimidines having inherent viscosities of 0.2–1.2 dL/g in almost quantitative yields. Syntheses of aliphatic polyphthalimidines with higher inherent viscosities were also achieved by a two-step procedure involving ring-opening polyaddition and subsequent thermal cyclodehydration. All the polymers were amorphous and readily soluble in N-methyl-2-pyrrolidone (NMP), m-cresol, nitrobenzene, pyridine, and chloroform. Tough and flexible films could be cast from NMP solutions of the polymers. Glass transition temperatures of the polyphthalimidines were in the range of 158–246°C. The thermogravimetry of the aromatic polymers showed 10% weight loss in air and nitrogen at 445–515 and 500–520°C, respectively. The crosslinking reaction of some benzylidenependant polyphthalimidines took place at 300°C through double-bond addition to afford cured polymers with improved thermal stability.     

Synthesis of polyphthalimidines with benzylidene group from aminophthalide monomers

Two aminophthalide monomers, 6-amino-3-benzylidenephthalide (I) and 3-(p-aminobenzylidene)phthalide (II), underwent self-polycondensation in o-phenylphenol at 250°C to yield polyphthalimidines with inherent viscosities up to 0.5 dL/g. These polymers were readily soluble in a variety of solvents such as dimethylformamide, dimethyl sulfoxide, m-cresol, pyridine, and methylene chloride. The temperatures at which a 10% weight loss occurred by thermogravimetry in nitrogen were 460°C for the polymer derived from I and 490°C for the polymer from II. The glass transition temperature of the polymer from I was 332°C, determined by thermomechanical analysis.     

Synthesis of tert-butyl-substituted poly (ether ketone) by nickel-catalyzed coupling polymerization of aromatic dichloride

tert-Butyl substituted poly (aryl ether ketone)s with relatively high molecular weights were prepared by the Ni-catalyzed polymerization of tert-butyl substituted aromatic dichlorides containing ether ketone unit. These polymers were amorphous and soluble in common organic solvents, such as THF, dichloromethane, and chloroform. De-tert-butylation of the polymer by the treatment of trifluoromethanesulfonic acid in the presence of toluene proceeded smoothly and produced crystalline poly (aryl ether ketone). © 1994 John Wiley & Sons, Inc.     

分散共聚法制备特殊形态高分子微球的研究

以聚乙二醇 (PEG)大分子单体为反应性稳定剂 ,在丙烯腈的分散共聚反应中添加少量苯乙烯以形成疏水性核 ,制备得到了亚微米级高分子微球 .透射电子显微镜研究表明 ,该高分子微球具有特异的形态结构 .同时研究了分散共聚体系中各种反应因素对微球形态和直径的影响 ,结果表明 ,苯乙烯单体的添加量、PEG大分子单体的浓度及分子量、混合溶剂的组成对微球直径和形态均有明显的影响 .X 射线光电子能谱 (XPS)研究结果表明 ,微球表面聚集有亲水性PEG链 ,核为疏水的聚 (丙烯腈 苯乙烯 ) ,即形成的特异形态的PEG接枝高分子微球亦为复合型结构     

Facile and chemo-selective synthesis of tertiary alkyl isothiocyanates from alcohols

When tert-alcohols were treated with (COOH)₂ and NaSCN in the presence of iodine, tertiary alkyl isothiocyanates were obtained in good yield, whereas the corresponding thiocyanates were obtained in low yield in the absence of iodine.     

Structures of a CO adlayer on a Pt(100) electrode in HClO4 solution studied by in situ STM

We have obtained the first in situ STM atomic images of a CO adlayer on a Pt(100)-(1 x 1) electrode in 0.1 M HClO(4) solution, exhibiting a phase transition from c(6 x 2)-10CO to c(4 x 2)-6CO at E > 0.3 V vs. RHE.